runwell

Company News

Industry News

Seven main methods for welding equipment

Seven main methods for welding equipment

Welding method relying on arc heat is called arc welding. Manual arc welding is a kind of arc welding using manual welding rods, which is the most commonly used method in building steel structure welding.

19

2022

/

12

What are the characteristics of welding equipment system classification?

What are the characteristics of welding equipment system classification?

There are generally three types of welding equipment in the industry, namely, welding process classification, system size classification and peak number classification.

19

2022

/

12

What is formal installation in welding equipment? What is reverse loading?

What is formal installation in welding equipment? What is reverse loading?

In the welding process, the two poles of the arc welding machine are respectively connected with the covered electrode and the weldment to form a complete welding circuit. For DC electric welding machine, one is extremely positive and the other is extremely negative. When the weldment is connected to the positive pole, and the electrode base (covered electrode) is connected to the negative pole, it is called the positive connection method (referred to as positive connection for short); otherwise, it is called the reverse connection method (referred to as reverse connection for short). For AC welding machine, because the polarity of the power supply is alternating, there is no problem of forward and reverse connection.

19

2022

/

12

Operation of stud welding machine

Operation of stud welding machine

Place the stud welding machine in the workplace and ensure that the main power supply is turned off;

19

2022

/

12

Classification and precautions of stud welding machine

Classification and precautions of stud welding machine

Stud welding machine is a method that contacts one end of the stud welding head with the surface of the plate (or pipe fitting), energizes the arc, and applies a certain pressure to the stud welding head to complete the welding after the contact surface melts. Cylindrical head studs for arc stud welding are applicable to high-rise steel structure buildings, industrial buildings, highways, railways, bridges, iron towers, automobiles, energy sources, transportation facilities, airports, stations, power stations, pipe racks, hoisting machinery and other steel structures.

19

2022

/

12

Several maintenance and inspection methods of welding equipment

Several maintenance and inspection methods of welding equipment

Welding equipment will always fail for various reasons after being used for a period of time. At this time, the user must refer to the instruction manual of the welding equipment for inspection and maintenance, that is, find and judge the cause according to the fault phenomenon. After the fault location is determined, repair and replace it to solve the fault, so that the welding equipment can be put into use as soon as possible, and reduce the economic loss caused by the equipment fault.

19

2022

/

12

< 12 >

Nantong Runwell Welding Machine CO.,Ltd.

Address：Building J6, East District, Qingfeng Pioneer Park, No. 1 Qingfeng Road, Chongchuan District, Nantong, Jiangsu, China.
Marketing Department：+86-513-83527313   +86-513-83549520
China World Trade Center Department：+86-513-83549521   +86-513-83518325 
Service Department：+86-513-83549522   +86-513-83549523
E-mail：999@999welding.com
Fax：+86-513-83519614

img

Website

Copyright © 2022 Nantong Runwell Welding Machine CO.,Ltd.

Powered by www.300.cn | SEO